Paper Making Machine

Your Professional Paper Making Machine Supplier

Our factory that is manufacturing for paper product making machine covers an area of up to 2000 square meters. There are nearly about 70 technicians working for machine research, design, manufacturing, and inspecting. They are devoted themselves to equipment industries.
Our factory that is manufacturing for paper product making machine covers an area of up to 2000 square meters. There are nearly about 70 technicians working for machine research, design, manufacturing, and inspecting. They are devoted themselves to equipment industries.

Why Choose Us

Our Service

We can provide high-quality suitable solution according to the actual situation. If people have specific requirements about the equipment, we can support OEM service for you, like the machine voltage, color and so on.

Main Market

We have exported the paper products making machine to more than 60 countries, such as America, Mexico, Canada, Nigeria, Ghana, German, France, United Arab Emirates, Lebanon, Jordan, Australia, Russia, Malaysia, Turkey, Armenia, Israel, Kosovo, etc.

Our Factory

Product Application

We have the manufacturing equipment for paper cup, paper cup lid, kraft paper, corrugated paper, corrugated paper, paper box, etc. Besides, we also provide die roll cutting machine, paper slitting machine, paper rewinding machine, A4 paper cutting machine, carton folding and gluing machine, and so on. They are widely used in paper cup factory, paper mills, carton plant, etc.

Types of Paper Making Machine

Fourdrinier Machine

The Fourdrinier machine is the most commonly used Different Types of Paper Machine by the paper and pulp industry.

Twin-Wire Former

“Twin Wire former” known as we understand according to the name is a two-wire type of Paper Machine. The twin design allows paper manufacturers to simultaneously dewatering of the pulp on both sides providing effective outcomes.

Multi-ply Formers

Multi-ply formers are Different Types of Paper Machines that are proficient in producing multi-layered paper products by forming individual layers of pulp and then combining them before pressing and drying.

Production Process Of Paper Making Machine

Paper Pulping
If you use the used paper as raw materials: Used paper → Separate and clean the fibers → Dilution process to form a thin fiber mixture → Bleach → Washing and concentration → Paper pulp.

If you use wood/straw/cotton rod as raw materials: Wood/Straw/Cotton rod → Fiber separation → Wash screening → Bleach → Washing → Paper pulp.

Papermaking
Check the Paper making process here: Paper pulp → Conveyor → Forming → Press → Dry → Coater → Dry → Paper roll machine → Rewinder → Paper roll.

Kraft paper production process
Raw materials (waste paper) → Pulper → vibrating sieve → pulp tank → pulp pump → bleach machine(thruster) → refiner machine → pulp tank → pulp pump → pressure sieve → pulp tank → pulp pump → except sand machine → net box → cylinder → blanket → paper making machine → drying → roll paper → the big finished jumbo paper → process machine → Kraft paper.

Technical Parameters Of Paper Making Machine

Main products	Fluting Paper\|Corrugated Paper\|Testliner Paper\|Kraft Paper\|Duplex Board Paper
Test liner Ration	90-150g / m2
Capacity	200t/d
Net paper width	3800mm
Gross paper width	3860mm
Working speed	250-380 m / min
Design speed	400 m / min
Gauge	4900 mm
Roll of dynamic balance	G2.5
Cylinder of dynamic balance	G4
Batch-off roll of dynamic balance	G1.6
Drive mode	AC motor variable frequency speed regulation segment drive
Paper machine layout form	Single layer layout
Pattern	Left-hand machine
Banner moisture difference	≤±1%
Banner quantitative difference	≤±1.5%
Dryness of Paper
Paper dryness out of wire part	20-22% (± 1%)
Paper dryness out of press section	44-46% (± 1%)
Before sizing	92%
Paper roll machine	92%
Lateral shrinkage	About 3.5%
Freshwater clarified water
Requirements	Clear, colorless, sand removal
Water pressure	3.0MPa, 2.0MPa, 0.5MPa
PH value	6-8
Power Supply
AC voltage	High pressure,380/220V±5%
Control point pressure	220/24V
Frequency	50HZ±1%

Installation Requirements of Paper Making Machine

The installation process of Paper Machines involves several critical steps to ensure smooth and efficient operation. It begins with thorough site preparation to ensure that the site is ready for installation, including meticulous attention to machine foundation design for stability. The next step is machine assembly, where various components such as the fourdrinier machine, cylinder machine, or tissue machine are assembled. This is followed by system integration, where advanced automation and control systems are integrated to ensure seamless operation and maximize machine efficiency. Thorough testing and calibration are then conducted to verify that the machine operates at peak efficiency, in line with established maintenance plans that incorporate predictive maintenance strategies. Finally, personnel are trained on safety protocols, operation, and maintenance of the paper machine, ensuring compliance with environmental regulations and optimal production of high-quality writing paper.

Our certificates

productcate-1-1

FAQ

Q: What does a paper-making machine do?

A: The paper machine is a device for continuously forming, dewatering, pressing, and drying a web of paper fibers. Until recently, the most common type of wet end was the Fourdrinier, where a dilute suspension of fibers (typically 0.3%–0.6% consistency) is applied to an endless wire screen or plastic fabric.

Q: What machine is used to make paper?

A: Fourdrinier machine
Fourdrinier machine, device for producing paper, paperboard, and other fibreboards, consisting of a moving endless belt of wire or plastic screen that receives a mixture of pulp and water and allows excess water to drain off, forming a continuous sheet for further drying by suction, pressure, and heat.

Q: What are the two types of papermaking machines?

A: Traditionally, paper machines have been divided into two main types: cylinder machines and Fourdrinier machines.

Q: What are the five stages of paper making?

A: Paper making involves 5 steps: Chipping, Making of wood pulp, Spreading the pulp, Pressing-Drying-Rolling and Cutting Sheets.

Q: What are the raw materials for paper making?

A: Paper is a thin sheet usually manufactured from cellulose pulp derived from wood and other lignocellulosic materials such as cotton, rice or wheat straw for writing, printing and packaging purposes.

Q: How fast do paper machines run?

A: Average speed of paper machines, 1800-2000; Meters / Minute; Sources:... Download Scientific Diagram.

Q: How does a paper making machine work?

A: After the pressure screen, the stock enters a manifold where it is drawn off over the width of the paper machine into the headbox. Stock leaving the headbox is made into a sheet by filtration. The fibrous mat is called a wet web, which is pressed, dried, and wound into a reel of paper on the paper machine.

Q: What is a deckle in a paper machine?

A: A deckle is a removable wooden frame or "fence" used in manual papermaking. The deckle is placed into a mould to keep the paper pulp slurry within the bounds of the wire facing on a mould, and to control the size of the sheet produced.

As one of the leading paper making machine manufacturers and suppliers in China, we warmly welcome you to buy high quality paper making machine at competitive price from our factory. For more cheap products, contact us now.

paper slitter rewinder, a4 paper roll cutting machine